YIKONG 1:8 RC Crawler YK4082 4082 RC Electric Simulation Rock Road Model Car RC Crawler Buggy Vehicle Adult Kids Toys

V3 Easy Control YKfour thousand and eighty-two 1/8 Remote control electric simulation Jeep four-wheel drive high and low speed Climbing off-road vehicle differential free shipping

 four thousand and eighty-two Suggest using 550’s 3300kV mountain axe; The size of 540L is not suitable, and the connection method of the motor teeth is not suitable!!

Frame update
1. Update of the main beam
2. The new gearbox has been reduced in size and the gear structure has been updated
3. Add backpropagation
4. Motor, gearbox, electrical equipment center of gravity lowered and moved forward
5. Front door axle reduction gear updated with high torque gear ratio
6. Add car body decal stickers

The following is a detailed introduction to V2

Easy to control YK4082 1/8 Remote control electric simulation Jeep four-wheel drive high and low speed Climbing off-road vehicle differential free shipping

 4082 Suggest using 550’s 3300kV mountain axe; The size of 540L is not suitable, and the connection method of the motor teeth is not suitable!!

Free wave box kit worth 368 yuan

Battery Company Size: 48MM Wide 高26MM  长16.0MM

Easy to control modelRelease of 2022 1/8 YK4082 climbing bike,

The new car mainly has the following changes:

Move the motor position forward to below the hood;

The bridge mounted servo will be changed to the beam mounted servo, and the servo protection device will be replaced on the servo arm;

A new installation layout has been added to the battery box, which has been moved directly in front of the gearbox;

The tire has been replaced with the same material as YK6101, improving grip,

To reduce the weight of the rear of the car, the spare tire has been removed;

The wiring of the lamp group has been integrated, making the wiring more concise and convenient;

The rearview mirror has been replaced with soft rubber material, which can reduce the probability of damage when flipping over.

These changes can enhance the vehicle’s climbing and obstacle crossing ability, making the YK4082 no longer positioned as a pure entertainment model. The original factory car has stronger climbing performance, becoming a good hand in crossing and climbing. The current YK4082 comes with a set of accessory packages, numbered 12041, for upgrading. Players only need to install them themselves to upgrade to the new 2022 model.

The 2022 YK4082 model has added metallic yellow and will be available for sale soon

The Easy Control 4082 has been launched, with a 1/8 ratio and all the functions you want, including high and low speed gears, front and rear differential locks, linkage lights, door bridge structure, etc

Basic parameters of the frame:
Total length 635mm (including spare tire)
Full width 290mm
Total height 300mm (including luggage rack)
Wheelbase 370mm
Approach angle 65 º
Vertical through angle 30 º
Departure angle 48 º
95 above ground (when adjusting the ring by 5mm)
Tire 135/50mm
Weight 4.19KG (excluding battery and counterweight)
Gear ratio (18T) high-speed 1:33
Low speed 1:13.4

Add a set of front/rear anti roll bar components, which can be installed according to different terrains. When climbing or in harsh terrain, it is necessary to disconnect and remove the anti roll bar. If you are on the beach or by the river, you may want to try installing it, which will definitely bring you a new driving experience.

Multiple colors available

Two sets of front faces are optional. Remove the original factory front face, which contains a 7-hole front face. It’s very simple, just remove the few fixed small screws inside.

Arriving at the side of the vehicle, the original factory interior and the dashboard seats in the driver’s cabin have all been installed. The rear of the car has removed decorative components such as oil drum jacks and is equipped with a more popular spare tire rack component. The spare tire is of the same size and can be used on the ground.

Size:

Length: 60CM  wide：29CM tall：29cm

Wheelbase: 37CM

The interior of the gearbox is made of machined steel gears, which have higher strength and smoother operation. The entire vehicle adopts a cross joint structure. As always, the aluminum alloy CNC precision machining integrated molding of the main beam . The shock absorber adopts an external spring large capacity shock absorber tube, which can be adjusted by adjusting the ring to raise or lower the height of the vehicle body.

Haoying 880 electric adjustment, balancing climbing and off-road, with a factory set drag brake value of 50%. 775 black leather motor, this motor has undergone multiple rounds of testing and tuning by the manufacturer, with full power and strong low torque. The servo has been upgraded to 25KG all metal teeth and aluminum alloy servo arms. The remote control receiver retains the original economical, practical, and stable 6-channel integrated light control, and the battery needs to be purchased separately.In terms of lighting, compared with YK4102, the hood spotlights have been removed, and turn signals on both sides of the daytime running lights on the wheel arches have been added, with a yellow light source. In addition to brake and turn signals, the rear of the car has added reverse lights and white light sources. The high-speed dual flash reminder function has been cancelled, and the remaining lights remain unchanged.

Flip and add magnetic suction, high magnetic magnet, firmly suck on the car shell, and also add a knob similar to YK4103, making the car shell lock more securely.Optimization and upgrading

The axle has been thickened and thickened, and the nylon formula has been adjusted to better cope with the cold climate in the north. The door hinges have been replaced with decorations in the same color as the body, and so on Looking forward to your discovery!